Changes between Version 10 and Version 30 of Help/Action/OrthogonalizeShape


Ignore:
Timestamp:
(multiple changes)
Author:
(multiple changes)
Comment:
(multiple changes)

Legend:

Unmodified
Added
Removed
Modified

  • Help/Action/OrthogonalizeShape

    v10 v30  
    11[[TranslatedPages]]
     2[[PageOutline(2-10,Table of Content)]]
    23
    34= Tools > Orthogonalize Shape =
    45
    5 [[Image(source:trunk/images/ortho.png)]] ''Keyboard shortcut:'' **{{{Q}}}**
     6[[JOSMImage(ortho,link=,48,margin-right=20)]] ''Keyboard shortcut:'' **`Q`**
    67
    78**Move nodes that all angles are 90 or 180 degrees.**
    … …  
    910With one or more ways selected, the form will be modified so that all angles will be 90 or 180 degrees.
    1011
     12[[JOSMImage(misc/error,24,middle,link=,margin-right=5,margin-bottom=5)]] **Be careful when using this feature e.g. on buildings. A lot of buildings are indeed not orthogonal in reality.**
     13
     14
     15== Simple use case ==
     16Select each way separately or several ways together and hit `Q`. This will orthogonalize each single way on its own. Ways with minimum two sharing nodes which are selected together will be orthogonalized together, too.
     17
     18[[Image(q-simple.gif,link=)]]
     19
     20
    1121== Using two nodes for alignment ==
    12 
    1322You can select two additional nodes. Then segments will be aligned in accordance with these nodes.
    1423
    15 [[Image(q-align.gif)]]
     24[[Image(q-align.gif,link=)]]
    1625
    17 Later, you can cancel the movement of certain nodes, select them and press **{{{Shift+Q}}}**.
    1826
    1927== Complex buildings ==
     28* temporarily split buildings with `P` [wikitr:/Help/Action/SplitWay Split Way]
     29* orthogonalize portions of a building as usual
     30* reconnect parts back with `C` [wikitr:/Help/Action/CombineWay Combine Ways]
    2031
    21 * use split buildings temporarily with {{{P}}} [Help/Action/SplitWay Split Way]
    22 * orthogonalize portions of a building as usual
    23 * reconnect parts back with {{{C}}} [Help/Action/CombineWay Combine Ways]
     32[[Image(split-q-then-combine.gif,link=)]]
    2433
    25 [[Image(split-q-then-combine.gif)]]
     34To orthogonalize a part of a building without splitting it, simply select the wanted nodes. Note that the selection order of the nodes does matter here, so selecting e.g. via rectangle will usually not work.
     35
     36[[Image(q-partial-without-split.gif,link=)]]
     37
     38
     39== Undo moves of selected nodes ==#Undomovesofselectednodes
     40Select nodes you want to undo, then press `Shift+Q` and selected nodes will be placed back to origin.
     41
     42[[Image(shift-q.gif,link=)]]
     43
     44
     45== Orthogonalization is not Rotation ==
     46Before (note small extrusion, multiple times smaller than other part):
     47
     48[[Image(Orthogonalization is not Rotation - before - cropped.png,link=)]]
     49
     50After Orthogonalization ([https://knowledge.autodesk.com/support/autocad/getting-started/caas/CloudHelp/cloudhelp/2016/ENU/AutoCAD-Core/files/GUID-9810D35D-E975-49E2-88EA-51FE4ACC92DB-htm.html dimensions]/length is not preserved):
     51
     52[[Image(Orthogonalization is not Rotation - after - cropped.png,link=)]]
     53
     54For rotation see [wikitr:/Help/Action/Select#Rotate Rotate].
     55
    2656
    2757----
    28 Back to [Menu/Tools Menu Tools][[Br]]
    29 Back to [wiki:/Help Main Help]
     58Back to [wikitr:/Help/Menu/Tools Menu Tools] \\
     59Back to [wikitr:/Help/Menu Main Menu] \\
     60Back to [wikitr:/Help Main Help]